An open-area test site (OATS) is about as simple as EMC infrastructure gets: a flat metal ground plane, a turntable, an antenna mast, and as little else as possible within the test ellipse. The hard part is the ambient. Radiated emissions limits are low enough that broadcast FM, two-way radio, cellular sites and Wi-Fi from nearby buildings can sit right on top of a product's emissions. Sites in a quiet RF environment are worth driving to.
Why Summit County?
The Weber River corridor between Wanship and Coalville was quiet in exactly the way that matters: few transmitters, little development, and mountains between it and the Wasatch Front's broadcast sites. Two independent labs put sites there. Communication Certification Laboratory ran "open area test site #2" at 29145 Old Lincoln Highway in Wanship, whose site description the FCC accepted in March 2009. A few miles up the road, DNB Engineering still runs two 30-meter open-area test sites at 1100 Chalk Creek Road in Coalville, which the company describes as one of the world's lowest natural electromagnetic ambient sites.
Who used the Wanship site?
After CCL became Nemko-CCL and the West Valley City lab burned in 2015, VPI acquired the Utah-based operations of CCL-Nemko. For roughly the next ten years VPI provided FCC and CE regulatory testing, and many of its customers' products went through the Wanship site. VPI's laboratory listing describes a 10-by-3-meter OATS alongside its anechoic and semi-anechoic chambers.
Why did the Wanship site close?
In an update posted in January 2026, VPI said it had closed the Wanship test site and discontinued FCC and CE regulatory testing. The reason it gave is the one every OATS operator eventually faces: rising RF background noise from nearby development, including new neighborhoods, cell towers and Wi-Fi networks, made controlled open-air conditions harder to maintain. Summit County's growth caught up with the quiet that put the site there. VPI kept customer test data for ten years and continues pre-scan testing in its Draper chamber.
What replaces an open-area test site?
Mostly semi-anechoic chambers. A chamber brings its own quiet ambient with it, and ANSI C63.4 and CISPR 16 allow alternative test sites when they meet normalized site attenuation limits. Chambers cost more up front and are harder to validate at low frequencies, which is why canyon OATS lasted as long as they did.